Design a Rapsberry Pi - PWM/IO addon board

We need someone to design a schematic and a PCB layout of a Raspberry Pi 3 hat/addon board that drivers all 4 peripherals of 4 lockers, so a total of 16 peripherals. For each locker we have the following peripherals:

1.) CABINET LOCK:

https://eboxlock.en.made-in-china.com/product/gqHQAtcMHjrs/China-Electronic-Cabinet-Lock-with-Reporting-and-Manual-Override.html
- one GPIO drives the lock
- one GPIO is connected to the status microswitch

2.) IR OBJECT DETECTOR:

https://www.aliexpress.com/store/product/IR-Detection-Module-for-Electronic-Lockers/1018446_32820031274.html
- one GPIO used for reading the detectors status

3.) 1 meter (60 LEDs) of SMD 2835-60 LED STRIPE:

https://www.electron.com/waterproof-led-strip-2835-cool-white-strf-2835-60-cw-ip65-1-meter-length-p112804/?cid=10717

- dimming the LED stripe with a separate I2C PWM controller, with something like PCA9685
- the length of the LED stripe may vary between 0.5 - 2 meters

4.) 4Pin Common Anode RGB 3W Power LED

https://www.ebay.com/itm/1W-3W-5W-White-Royal-Blue-Green-UV-Yellow-Red-High-Power-LED-Chip-COB-Lamp-PCB/122604065816

- the 3 color channels should be PWM driver, with something like PCA9685

OTHER INFO:
-------------
- we need headers for all peripherals
- the final deliverable will include the schematic, the layout, the complete BOM, and all the files necessary to send this to a fab house
- we need a BOM as well and components should be sourced from farnell.com
- we prefer SMD components that can be easly hand soldered
- we want to mount the PCB with 4 screws
- Rapsberrys inputs, outputs and power should be protected, so no electrical noise interfere with it
- addon board will be powered by a Meanwell SP-200-12 PSU
- If a jumper is set the Raspberry should be powered from the addon board
About the recuiter
Member since Aug 31, 2017
Chakravarthi V.
from Tamil Nadu, India

---

---

Looking for help? Checkout our video tutorial
How to search and apply for jobs

How to apply? Do you have more questions about the Job?
See frequently asked questions